Polymer Clay Fan

Free Sculpting Tutorials

Angel & Demons – More Details on the Demon

Posted by goregt On February - 8 - 2012

In the attached pics I’ve done a little cleanup work on the wings and the demon’s face.  I still have a very long ways to go with this piece but everything is starting to take shape now.  The cleanup is pretty easy, it just takes a bit of time and patience to work through it.

  1. Instead of using a brush with rubbing alcohol, which is used to smooth out Super Sculpey, is use Orderless Mineral Spirits when working with wax.
  2. The key is to let the Mineral Spirits dry before moving onto the next stage.  The wax will dull a bit and also tends to get a little tacky.
  3. Once dry I come back with my brush and warm water.  The water will bead up on the wax and I can use quite a bit of pressure to clean the forms.
  4. If necessary I’ll also use a very smooth cloth that is soaked in warm water.  The cloth is more ideal for larger areas and you can really adjust the pressure when smoothing out the forms.

These are the steps I typically take when smoothing out the various forms but there are times when a very fine grained sandpaper is necessary.  Most of my work is textured and I usually use the sandpaper on areas that need to be very smooth.  The following link goes into more detail on the steps I just covered – smoothing wax.

Leave a Reply

*

VIDEO

Enter the video embed code here. Remember to change the size to 320 x 270 in the embed code.

TAG CLOUD

Recommended Sites

About Me

Nothing special, just a self-taught sculptor having fun with my art and showing all of you the tips and tricks I use to create my own artwork

Twitter

    Photos

    Activate the Flickrss plugin to see the image thumbnails!