Polymer Clay Fan

If you're new here, you may want to subscribe to my RSS feed or Newsletter for additional free sculplting tips. Thanks for visiting!

Mold making is one of those tricky little things that can be very simple or complex depending on what it being molded. Over the next few tutorials I’ll show you how to create both a simple and a complex mold all from the same sculpture.

The sculpture that I will be using for the tutorial is complex in design with tons of detail work and will serve as a great example that no subject matter is too detailed to be molded.

Read the rest of this entry »

Popularity: 77% [?]

If you enjoyed this post, make sure you subscribe to my RSS feed!

Recently I had put together a little article that outlines some of the key differences between sculpting with wax and polymer clays (http://www.polymerclayfan.com/sculpting-with-wax-vs-polymer-clay.htm). In hindsight, the review was more of a comparison between sculpting with Super Sculpey and a relatively new wax called FUSE. I think it is important to point out that not all polymer clays are created equal and the same case could be made for wax. As of the writing of this article, FUSE is the only wax I have ever tried so the chances are that my opinions regarding sculpting with wax could drastically change from one wax product to another.

Read the rest of this entry »

Popularity: 72% [?]

If you enjoyed this post, make sure you subscribe to my RSS feed!